Description
The Speedypress 90cm manual flat bed fusing ironing press has been designed with versatility and ease of use very much in mind.
It is suitable for fusing work on parts such as lapels, collars, cuffs and the trouser waistband area.
Its large 90cm x 40cm heated top plate makes it suitable for use in the manufacture of many different types of garments and textiles.
With a temperature range of up to 230°c, it can be used with a wide selection of today’s modern fusible interlinings (and heat transfers etc.).
Stand-by feature.
Clear countdown seconds timer, which clearly shows where the press is up to whilst pressing.
Automatic buzzer notification at the end of each pressing cycle.
The easy-to-use push button digital controls allow full and fine tuned control of the fusing process: Temperature is electronically controlled from 0°c right up to its maximum of 230°c.
The timer can be set from 0 seconds through to 90 seconds, and because the Speedypress 90cm Fusing Press features a unique front mounted, hand-adjustable pressure knob that allows you to choose between 4 different levels of pressure, it is possible to set different pressures without the need of any tools.
The Speedypress 90cm Fusing Press has a wide opening top plate with spring lift assistance, which gives full access to the lower area for easy loading and unloading.
The heated top plate is fitted with a removable Teflon coated heat resistant screen, which helps prevent the fabrics and interlining sticking to the press.
The fusing press, with its steel framework, is tough, safe, reliable, and easy to be operated.
A manual control makes it possible to set the pressure of the top and the pressing time, whereas the temperature of the top is set through a digital thermostat.
A safety device prevents the top from closing accidentally.
Pressing Table / Work Surface: 900mm x 400mm.
Voltage: 220v.
1 phase power: 2,250watt.
Temperature: 0 – 230°c.
Heating time: 0 – 90 seconds.
Net Weight: 79kg.
Gross Weight: 100kg.
Max Pressure: 0.315 bars per sq cm = 325grams per sq cm = 4.56 PSI.
Can be used either on a single or a 3 phase electrical supply.
Single phase requires a 20 amp fuse; 3 phase requires a 12 amp fuse.
Reviews
There are no reviews yet.